The Perfect Glove & Lever Adjustment

,

Finding the right motorcycle glove can be time consuming, but I believe it’s worth it. I think most riders choosing the glove because of their looks. But design or even colors should be just a secondary thought. A high quality glove has its price, and yes I do understand that money is maybe a factor for you… but this goes kinda the same way you should pick a helmet, because  a natural protective instinct makes us bringing our hands out to catch the fall, so you will crash in 90% assuredly right on your hands. Here is what a bad glove choice can do to us:

  • Needles and pins (uncomfortable, slow reaction time)
  • Bad quality (short life, leather cracks, bad protection)
  • Bad protectors (weak, wrong placed, open wrists = big time injuries)
  • Bad size choice (too small: slow reaction time. Too big: interferes with throttle and levers)
  • Bad features (sweating hands, uncomfortable, slow reaction time)

Axo USA is one of a few manufacturers I found who are delivering the full package.  Their website offers sizing charts and lots of intermediate sizes to pick from.

Also their category description gives a good insight before you rush and take a purchase too easy. Spend your money wisely.

Our little video tutorial should below gives you a good idea what to look for in a glove, and how important it is to also set the levers to your needs.

How to adjust your levers the right way

Most riders are leaving the levers the way they are set from the factory, but I highly recommend to readjust them to your needs. I demonstrated in the second part of the video tutorial above, how essential especially the brake lever position can be. I actually forgot to mention that this even puts your hands and arms in a better angle to catch up G-forces under hard braking. Here is what we give away with wrong lever positions:

  • https://www.rockymountainatvmc.com/images/prod/400/t/tus_08_clu_per_blk.jpgToo high: slow braking procedure, bad feeling for the braking
  • Too low: hard to reach when doing hanging off
  • Interferes fingers/levers

As mentioned- you’ll probably can’t just loose the bolts and simply twist each perch because most manufacturers having a pin set to avoid that for liability reasons of course. You need to remove each pin which is not a big deal at all. Have the right tools handy and be patient with your work. Set the levers in a straight line to your arms/fingers, and tighten up all bolts properly. You’ll find a much more relaxed riding position after spending some time with this.

2 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.