You guys remember my article ‘Motorcycle Sprocket Job: More Power‘? That’s where this one extends it a little.
So finally time has come that I can also ramp up the game on our Ducati Multistrada 1200 Enduro Pro. When it’s time for a new chain- that’s also a good time to make these upgrades, and so I took advantage of it.
“Indy” is going to get 2 more teeth on the rear. Does this bike really need more torque?… oh hell no, but pure acceleration and even better ride-ability can’t hurt. The gears were a touch too far apart in my opinion, so that bigger rear sprocket gets them closer together and that gives me more options in regard gear choice on corners. BikeMaster had all the stuff I needed to get the job done, and quick as usual and their pricing is right!
First you want to loose up all sprocket bolts, before you get the rear wheel out. That makes things easier. Now the wheel comes out and the new BikeMaster sprocket replaces that extremely cheep looking Ducati OEM part. I mean… look at it!
Next step is the chain. For that reason you put the wheel back in and cut the old chain. Don’t pull it out though, because you want to connect the new chain to it and to pull it through the swing arm and over and out of the front sprocket housing. That way you can save all the work with it. Now put the wheel/axle in the mid range of your chain spanners, which gives you wiggle room for your chain adjustments later. Ones done, you lay the chain up the sprocket to determine the length and so where to take links out. I recommend to look twice which and where you take it out. Now you close the chain with a lock (comes with the chain) and adjust its slack. Don’t forget to tighten up your rear axle… and you are all done.
You can’t add power and torque in a cheaper way. Do yourself a favor and do it. Thank me later :)
Headcoach Can Akkaya, Superbike-Coach Corp
