The one sided swing arm of the Panigale hosts the rear brake rotor and the sprocket carrier (which gets its own post later). I’ve replaced the rotor with a way lighter one and the brake pads to Bikemaster sinter metal pads. This stuff is affordable and never lets you down. At that point I’ve checked on the wheel alignment to see if the swing arm is bend. That went well so I can move on to center the two sprockets for a flawless chain run (next update)
Headcoach Can Akkaya
Some stuff around the swing arm and rear sets has been done. A carbon cover for the looks (the tire huger goes soon), and the toe protector makes truly sense. Rear shock pos changed to ‘flat’, and preload adjusted (gotta get familiar with the electronic setting system though). The rear sets journey was interesting. The challenge… to keep the expensive, but hell of smooth Ducati ‘PULL’ quickshifter- BUT use it in a MotoGP shift pattern system. Funny is, that Ducati offers a 4 page long description to just turn this around on the stock rear sets- but doesn’t even mention that a ‘PUSH’ quickshifter would be necessary. Thats about 300 bux extra, and I go… no. So I went to see if there are rear sets which allowing all kinds of constellations in the leverage to keep the pull shifter. I found a nite set in China for 120 bux incl shipping and they work smooth as hell. The pegs are quite short though, so i had to find washers which allow me to adjust their length a bit. What I extremely like with these rear sets is that they are fully adjustable since the stock sets are way to far in the back and making tired real quick. Those going all in the front and up… as I was use to on my prototype race bikes :-)
Headcoach Can Akkaya
Unfortunately it needs a license plate to run this bike on some public roads, cuz’ I’ll use it to teach Road Skill 1on1 students. So, since the ugly and way to heavy holder is out… I’ve build my own fender eliminator with a few simple things: The license plate, a piece of Lowes aluminum sheet, and a plate light from BikeMaster Products. The cost… about 10 bux!!!
Headcoach Can Akkaya
Unfortunately we have to reschedule the Day 2 class from 9/3/2017 to 9/24/2017.
That will replace Day 3, which moves to 12/3/2017.
All students are getting a email soon.
Headcoach Can Akkaya
I got a custom paint job on the way (the boring Ferrari image red dress gotta go!). Till it comes in, I’ve made some mods to the bike which 1) look better (for my taste), and 2) saving weight. I absolutely HATED that high/black windshield and replaced it with a shield from a friend until mine is coming. The mirrors got replaced by cheap SSR block off plates.
The shock cover is carbon now, and the heavy gas cap got replaced by a $19 (!!!) CNC machined gas cap which I believe looks bad ass. I am happy now that I couldn’t sell my brand new Hyperpro RCS steering damper I had left from the R1 project… because the Ohlins damper was not working at all. Now I have 24 position getting satisfied with.
Most riders are too afraid to turn some wrenches on their bikes themselves, but since we know that there is a potential to adjust levers etc to a riders advantage (see previous articles), we could more or less easily semi-project our bikes and make them ‘ours’ on a bigger scale. I have such a fun doing this as soon as I have a new bike, that I am willing to share the process with you. You might get a taste of one or another upgrade, and try it on your own motorcycle. All the things I am doing are going under the motto… finding performance (power and grip) resources, reducing weight (general and rotating masses), and last but not least- the look of it. All of this as affordable as possible! It all begins with the actual motorcycle and its raw numbers, so here is our ‘example’:
2014 Ducati Panigale 1199RThis is a pretty darn good bike already, so we don’t want to mess around much with geometries and electronics. The picture shows a absolute stock 1199 which comes up with these facts:
Let’s see where these numbers- and the appearance of “Cleopatra” is going…
To just sit down with pen and paper and to make notes in which direction you want to move forward makes sense already, but to also set upgrade limits per month and in logic installation phases even more. This makes you staying in control of costs and fall-out time. Plain said… if you just go by feel, then you probably start working on something which takes too much time- or to have parts ordered which you can not use at a certain time on the project. What happen is that you can’t use the bike at all in between. So spend your money wisely and order parts logically. Start only working on it when the parts arrived, and skip on the frustrations.
Each time I’ve done a upgrade phase, I will post about it here as soon as I can. So watch out here for new posts- or go on ‘Coach’s Motorcycle Bible‘ (scroll down to the story) where the story will be summarized. Watch out for the next step!
Headcoach Can Akkaya
